Surface renewal,
without the downtime.
Lutronic Ultra™ is a non-ablative 1927 nm thulium fiber laser that targets skin texture, tone, and pigmentation with minimal recovery — administered by Liz Lee RN at SynergyO3. Laser skin resurfacing in Encinitas and San Diego, with fractional laser facials for Carlsbad and North County.
Quick Answer
Lutronic Ultra™ is a non-ablative 1927 nm fractional laser that improves skin tone, texture, and pigmentation by triggering controlled healing beneath an intact skin surface. It's delivered in a single in-office session with a short recovery, and results build progressively over 4–8 weeks as treated skin turns over. Pricing starts at $600 for a full-face treatment, administered by Liz Lee, RN, within Dr. Heather Volpp's physician-led aesthetics practice.
The Science
How Lutronic Ultra™ works.
Ultra uses a 1927 nm thulium fiber laser wavelength in non-ablative fractional mode — creating microscopic treatment zones that trigger controlled healing without removing the surface skin layer.
The Lutronic Ultra™ system in the SynergyO3 treatment room, Encinitas.
Fractional Delivery
The 1927 nm wavelength is delivered in a fractional pattern — treating columns of tissue while leaving surrounding skin intact. This preserves the healing reservoir that drives rapid recovery.
Chromophore Targeting
At 1927 nm, the laser is selectively absorbed by water in superficial skin tissue. This targets pigmentation, texture irregularities, and sun damage in the epidermis and upper dermis.
Controlled Inflammation
Microscopic thermal zones trigger a wound-healing cascade — stimulating fibroblast activity, new collagen synthesis, and accelerated turnover of damaged skin cells.
Progressive Renewal
As treated tissue is replaced, skin texture smooths, tone evens, and fine lines soften. Results develop over 4–8 weeks post-treatment and continue improving with a series.
Choosing Your Laser
Light vs. Ultra: Two Depths of Skin Resurfacing
Both are non-ablative fractional laser treatments that renew your skin from within — the difference is how deeply they work. The right choice comes down to your goals, how much recovery time you have, and how much change you’re after.
Illustrative only — the Light Laser refreshes nearer the surface; the Ultra Laser reaches deeper for more remodeling.
Lutronic Light Laser
A gentle, more superficial treatment that brightens tone and smooths surface texture with minimal downtime.
- Great for first-time laser patients or a pre-event glow
- Ongoing maintenance between deeper treatments
- Minimal downtime — light redness that settles quickly
Lutronic Ultra Laser
Delivers more energy deeper into the skin to work on stubborn pigment, texture, and collagen — more change per session.
- For more visible sun damage or uneven texture
- Deeper collagen remodeling, fewer sessions for bigger change
- A little more redness — plan for a short recovery
At a glance
| Light Laser | Ultra Laser | |
|---|---|---|
| Depth | Nearer the surface | Deeper into the skin |
| Intensity | Lightest | Most intensive |
| Downtime | Minimal | Short recovery |
| Best for | Refresh & maintenance | Pigment, texture, collagen |
| Price | From $250 | From $600 |
Why is the Light Laser more affordable?
Because it's a lighter, more superficial treatment. It uses less laser energy over a gentler session, so it asks less of your skin — and your recovery. The Ultra Laser reaches deeper and does more remodeling in a single visit, which is why it's priced higher.
Neither is simply “better” — they’re different tools for different goals. Many patients start with the Light Laser and step up, or alternate the two over time.
Not sure which is right for you?
Liz Lee RN recommends the right depth for your skin and goals during your consultation.
Non-ablative laser resurfacing is performed by Liz Lee, RN, within Dr. Heather Volpp’s physician-led practice. Individual results vary. Liz Lee, RN evaluates your skin and goals during consultation. Pricing is subject to change.
What It Addresses
Skin concerns Ultra targets.
Lutronic Ultra is particularly effective for surface-level skin quality concerns. Liz Lee RN assesses each patient’s skin individually to determine treatment parameters.
Uneven Skin Tone
Post-inflammatory hyperpigmentation, sun damage, and irregular melanin distribution respond well to the 1927 nm wavelength’s selective chromophore targeting.
Texture & Pore Size
Roughness, enlarged pores, and surface irregularities from accumulated sun damage or acne scarring improve as new skin cell turnover is accelerated.
Fine Lines
Superficial lines in the epidermis and upper dermis soften as collagen remodeling and accelerated cell turnover replace damaged tissue with healthier skin.
Melasma (adjunct)
In select patients under physician guidance, low-density Ultra treatments may be incorporated into a comprehensive melasma management protocol alongside topicals.
Actinic Keratosis (AK)
Superficial precancerous lesions caused by cumulative sun damage can be addressed as part of a field treatment approach, in consultation with Dr. Heather Volpp for medical evaluation.
Overall Skin Quality
Regular maintenance treatments support ongoing skin health — addressing the cumulative effects of UV exposure, aging, and environmental damage before they become entrenched.
Transparent Pricing
Ultra laser pricing at SynergyO3.
Treatment parameters are customized per patient. Liz Lee RN will discuss your specific plan during consultation.
Face
- Full face treatment
- Topical anesthetic included
- Post-care protocol provided
Face & Neck
- Face and neck treatment
- Topical anesthetic included
- Post-care protocol provided
Face, Neck & Chest
- Face, neck and chest treatment
- Topical anesthetic included
- Post-care protocol provided
Genius® RF + Ultra Combo
- Genius® RF microneedling
- Lutronic® Ultra laser
- Topical anesthetic included
- Post-care protocol provided
Packages of 3 are available — $1,600–$2,500 depending on treatment area. Add hairline +$150. See the Pricing page for full details.
Protocol Pairings
Ultra inside a broader skin protocol.
Non-ablative laser works most effectively as part of a layered approach. Common pairings at SynergyO3:
Ultra + HOCATT
HOCATT ozone sauna therapy supports systemic detoxification and circulation. Patients who incorporate HOCATT into their routine may support the skin’s overall healing environment before and after laser treatments.
Ultra + Genius® RF
A powerful dual-depth protocol — Ultra addresses surface pigmentation and texture in the epidermis while Genius® RF works at deeper dermal levels for tissue remodeling. Together they provide comprehensive skin renewal.
Ultra + EBOO
EBOO extracorporeal blood ozonation reduces systemic oxidative burden and supports cellular health. Some patients combine EBOO with laser protocols as part of a comprehensive anti-aging and skin optimization approach.
Common Questions
Frequently Asked Questions
What's the difference between Lutronic Light and Lutronic Ultra?
Both are non-ablative fractional lasers, but they work at different depths — the Light Laser is a gentler, more superficial treatment for tone and texture with minimal downtime, while the Ultra Laser delivers more energy deeper into the skin for more pronounced pigment, texture, and collagen change. Liz Lee, RN recommends the right depth for your skin and goals.
How much downtime does Lutronic Ultra require?
Ultra involves a short recovery period with some redness — more than the Light Laser, but still non-ablative, meaning the surface skin layer stays intact. Most patients plan for a brief period of visible redness that settles within a few days.
How many Ultra laser treatments will I need?
Many patients start with a single session to address specific concerns, but for stubborn pigment or texture, a series delivers more comprehensive results — package pricing for 3 sessions is available. Liz Lee, RN determines the right treatment density and series length during your consultation.
How much does Lutronic Ultra cost?
Pricing starts at $600 for a full-face treatment, $750 for face and neck, and $900 for face, neck, and chest. A combination Genius® RF + Ultra protocol is also available starting at $1,800; packages of 3 sessions range from $1,600–$2,500 depending on treatment area.
Clearer skin starts with an assessment.
Schedule a Lutronic Ultra appointment with Liz Lee, RN. She’ll evaluate your skin, identify the right treatment density and series for your concerns, and build a protocol around your goals.